|
|
| Here's how I made up my 15 feet of antenna. I took the next biggest size aluminum tubing I had using nuts and washer. After drilling holds to insert the smaller tubing inside the 1" OD section. I place nuts and a few washer on the inside of each brass to center this section of tubing in place. And then check to make sure I had continuity with my ohm meter. All work out. The remainder of tubing all inter-lock with each other. Giving me the other 15 feet needed. And looking at the antenna from the ground up you would never know the different. Question does the antenna work? YES! | |
